Welcome to our website!
news_banner

Products

  • Cast Iron Sewer Pipe Fittings Hydrocyclones

    Cast Iron Sewer Pipe Fittings Hydrocyclones

    SML EN877 CAST IRON PIPE FITTINGS for building drainage

    Hydrocyclones

    Standard: BS EN877/DIN 19522/ISO6594

    Material: gray cast iron ISO185

    Coating: Epoxy Resin Paint&Powder epoxy

    Colour: red or gray

    Marking: OEM or M-Tub or at customers’ requirements

    Place of origin: China

    Application: Water drainage

    Tensile strength min.150Mpa

    Maximum brinell hardness HB260

    Internal coating resistance to salt spray: at least 350h, common 700 hours. resistance to waster water: at least 30 days at 23℃.

    chemical resistance from PH2 to PH12 at least 30 days at 23 ℃.

    resistance to temperature cycling: 1500 cycles between to 15-93℃.

  • 88° Long Radius Bend with Access Door

    88° Long Radius Bend with Access Door

    SML EN877 CAST IRON PIPE FITTINGS for building drainage

    88° Long Radius Bend with Access Door

    Standard: BS EN877/DIN 19522/ISO6594

    Material: gray cast iron ISO185

    Coating: Epoxy Resin Paint&Powder epoxy

    Colour: red or gray

    Marking: OEM or M-Tub or at customers’ requirements

    Place of origin: China

    Application: Water drainage

    Tensile strength min.150Mpa

    Maximum brinell hardness HB260

    Internal coating resistance to salt spray: at least 350h, common 700 hours. resistance to waster water: at least 30 days at 23℃.

    chemical resistance from PH2 to PH12 at least 30 days at 23 ℃.

    resistance to temperature cycling: 1500 cycles between to 15-93℃.

  • ASTM A888 Hubless Cast Iron Soil Pipes

    ASTM A888 Hubless Cast Iron Soil Pipes

    Hubless cast iron soil pipes and fittings are used in gravity flow applications. These pipes and fittings are intended for non-pressure applications, as the selection of the proper size for sanitary drain, waste, vent, and storm drain systems. The pipes are centrifugal casting, campact structure, free from pinhole porosity and slay, smooth surface and even wall thickness.

  • ASTM A888 Hubless Cast Iron Fittings

    ASTM A888 Hubless Cast Iron Fittings

    Hubless cast iron soil fittings are mainly used in drainpipe through a flexible linkage.The product has totally get the standards,ASTM A888,CISPI301,and has the following advantages:flat and straight,even pipe wall,high strength and density,high smoothness on the inner and outer surface of the wall,no defects in foundry,easy installation,easy maintain,long life,helpful to environment,fireproof and no noise.

    Coating: Inside and outside Bituminous paint coating

    Sizes: 1.5″, 2″, 3″, 4″, 5″, 6″, 8″, 10″, 12″, 15″

    Cast Gray Iron Pipe And Fittings Chemical Component P<0.38 S<0.15 Cr<0.50 Ti<0.10 Al<0.50 Pb<0.015 C+(Si+P)/3 CE>4.10

    Gray Iron Mechanical Properties>145Mpa

  • ASTM A888 Cast Iron Fittings Drains

    ASTM A888 Cast Iron Fittings Drains

    We can supply all kinds of Hubless fittings which can meet ASTM A888 standard,and also many special shapes fittings can be supplied.Coating:bitumen or Acid Resisting Epoxy Coated. Application: Floor, Ground drain,Roof drain.Material: Cast Iron,stainless steel,bronze,brass

    Surface Treatment: Polished and Cr or Ni plated.

  • Gully Grease Interceptor

    Gully Grease Interceptor

    Manhole Covers are manufactured for construction and public use.The manhole consisting of a frame and a cover and /or a grating. Manhole cover can better protect the safety of pedestrians and vehicles, and can better prevent rain and other liquids from entering. Manhole Covers shall be smooth and free from sand holes, blow holes, distortion or any other defects.

    Coating: Black bitumen Each individual clearance is limited to a maximum of 3mm

    Grade: AA1900KN, AA2 600KN, A1 400KN, A2 230KN, B 125KN, C30KN

    Cast Iron Grease Interceptor C/W a Heavy Grating, a Key Pocket & an Aluminium Strainer.

  • C.I. S TRAP   &    C.I. P TRAP

    C.I. S TRAP & C.I. P TRAP

    Place of Origin: China

    Standard: ASTM A888/CISPI 301

    Coating: Inside and Outside Bituminas paint coating

    Color: Black

    Material: Gray Cast Iron

    Marking:OEM or at customers’ requirements

    Size: DN40 to DN300

  • Type A Stainless Steel Couplings With Rubber Gaskets

    Type A Stainless Steel Couplings With Rubber Gaskets

    No-hub  couplings are engineered to connect No-hub cast iron pipe and fittings,cast iron pipe and plastic pipes or bronze pipes.The couplings consist of a high quality elastomeric compound gasket housed inside a stainless steel corrugated shield.

  • Type F Stainless Steel Couplings With Rubber Gaskets

    Type F Stainless Steel Couplings With Rubber Gaskets

    No-hub  couplings are engineered to connect No-hub cast iron pipe and fittings,cast iron pipe and plastic pipes or bronze pipes.The couplings consist of a high quality elastomeric compound gasket housed inside a stainless steel corrugated shield.

  • Type B Rapid Stainless Steel Couplings With Rubber Gaskets

    Type B Rapid Stainless Steel Couplings With Rubber Gaskets

    No-hub couplings are engineered to connect No-hub cast iron pipe and fittings, cast iron pipe and plastic pipes or bronze pipes. The couplings consist of a high quality elastomeric compound gasket housed inside a stainless steel corrugated shield.

  • Type CHA Stainless Steel Couplings with Rubber Gaskets

    Type CHA Stainless Steel Couplings with Rubber Gaskets

    No-hub  couplings are engineered to connect No-hub cast iron pipe and fittings,cast iron pipe and plastic pipes or bronze pipes.The couplings consist of a high quality elastomeric compound gasket housed inside a stainless steel corrugated shield.

  • Kombi Kralle

    Kombi Kralle

    The Grip collars  are fixed outside of the shielded couplings. They can strengthen the pressure which pipes bear. The dimensions can be from DN50-DN300. The bear pressure DN50-DN100 10 bar, DN150 -DN200 5bar, DN250-DN300 3bar.