Welcome to our website!
news_banner

Installation Instruction for Mechanical Tees/Cross, Side Outlets (Rolled type and Threaded type)

Side outlet (mechanical cross) can be directly used to connect the branch pipes with the main steel pipe. Firstly, to open the hole with hole-cutting machine on steel pipes, and clip the side outlet (mechanical cross) into the hole, around which are sealed by the gasket rings. Side outlet (mechanical cross) are categorized as threaded style and Grooved style. When be connected, the threaded mechanical tee or mechanical cross should be applied with some compacting paint on it’s outer screw thread, and then roll thread around it to ensure the sealing performance of threaded joint.

1. Check the hole pickles.图片1

2. Spread lubricant on gasket ring.

图片2

3. Put gasket seal in the Mechanical Tee.

图片3

4. Install the Mechanical Tee in the hole.

 图片4

5. Install the bottom piece on the upper one of Mechanical Tee.

 图片5

6. Secure the nuts and bolts of side outlet from both side.

 图片6


Post time: Jul-15-2021