EN877 Cast Iron Pipe BML, KML, TML

EN877 Cast Iron Pipe BML, KML, TML

♦BML drainage pipes

BML drainage pipes are for bridge drain system. 

Outside coating: zinc coating of at least 40μm layer thickness(290g/m²), covering silver gray epoxy resin coating at least 80μm.

Inside coating: epoxy resin 120μm same as SML pipe.

♦KML drainage pipes

KML drainage pipes are used for grease-containing waste water of professional kitchens and similar facilities.

Outside coating: zinc coating with an areal density of min.130g/㎡, covering with epoxy coating of a minimum of 60μm.

Inside coating: orche-coloured epoxy, double layer thickness at least 240μm.

KML fittings are coated inside and outside with a high quality powder epoxy of least 120μm.

♦TML drainage pipes

TML drainage pipes are based on EN877 and used for underground installation.

Outside coating: zinc coating with a density of 130g/㎡, covering with brown or red coating.

Inside coating: orche-coloured epoxy, layer thickness at least 120μm.

Fittings: epoxy powder coating red, 120μm at least.