-
Grip Collar
The Grip collars are fixed outside of the shielded couplings. They can strengthen the pressure which pipes bear. The dimensions can be from DN50-DN300. The bear pressure DN50-DN100 10 bar, DN150 -DN200 5bar, DN250-DN300 3bar.
-
Type E Stainless Steel Couplings With Rubber Gaskets
No-hub couplings are engineered to connect No-hub cast iron pipe and fittings,cast iron pipe and plastic pipes or bronze pipes.The couplings consist of a high quality elastomeric compound gasket housed inside a stainless steel corrugated shield.
-
EN877 BML Hubless Cast Iron Pipe
BML drainage pipes are for bridge drain system.
Outside coating: BML pipes bear a spray zinc coating of at least 40um layer thickness(290g/㎡), over that will spray a silver gray epoxy resin coating at least 80um.
Inside coating is the same epoxy resin 120um same as SML pipe.
-
EN877 KML Hubless Cast Iron Pipe
KML drainage pipe and fittings are used for grease-containing waste water of professional kitchens and similar facilities.
Outside coating: Bear a spray zinc coating with an areal density of min 130g/㎡, and above that an epoxy cover of a minimum of 70um.
Inside coating is orche-coloured epoxy.A double layer of resin epoxy with a total layer thickness 240um.
KML fittings are coated inside and outside with a high quality powder epoxy of least 120um.
-
EN877 TML Hubless Cast Iron Pipe
TML drainage pipes is based on EN 877, that the use of SML pipes for underground installation.
Outside coating: TML pipes bear a spray zinc coating with a density of 130g/㎡, over that there is a brown or red cover coat.
Inside coating: The coating is orche colour,epoxy 120um.
Fittings: Epoxy powder coating red, 120um at least.
-
Cast Iron Sewer Pipe Fittings Single Branch
SML EN877 CAST IRON PIPE FITTINGS for building drainage
45° Single Branch 88° Single Branch
Standard: BS EN877/DIN 19522/ISO6594
Material: gray cast iron ISO185
Coating: Epoxy Resin Paint&Powder epoxy
Colour: red or gray
Marking: OEM or M-Tub or at customers’ requirements
Place of origin: China
Application: Water drainage
Tensile strength min.150Mpa
Maximum brinell hardness HB260
Internal coating resistance to salt spray: at least 350h, common 700 hours. resistance to waster water: at least 30 days at 23℃.
chemical resistance from PH2 to PH12 at least 30 days at 23 ℃.
resistance to temperature cycling: 1500 cycles between to 15-93℃.
-
Cast Iron Sewer Pipe Fittings Double branch/Corner branch
SML EN877 CAST IRON PIPE FITTINGS for building drainage
88° Double Branch 45° Corner Branch 88° Corner Branch
Standard: BS EN877/DIN 19522/ISO6594
Material: gray cast iron ISO185
Coating: Epoxy Resin Paint&Powder epoxy
Colour: red or gray
Marking: OEM or M-Tub or at customers’ requirements
Place of origin: China
Application: Water drainage
Tensile strength min.150Mpa
Maximum brinell hardness HB260
Internal coating resistance to salt spray: at least 350h, common 700 hours. resistance to waster water: at least 30 days at 23℃.
chemical resistance from PH2 to PH12 at least 30 days at 23 ℃.
resistance to temperature cycling: 1500 cycles between to 15-93℃.
-
Short Bend with Access Door/ Single Branch with Access Door
SML EN877 CAST IRON PIPE FITTINGS for building drainage
45° Short Bend with Access Door 88° Short Bend with Access Door
45° Single Branch with Access Door 88° Single Branch with Access Door
88° Long Radius Bend with Access Door
Standard: BS EN877/DIN 19522/ISO6594
Material: gray cast iron ISO185
Coating: Epoxy Resin Paint&Powder epoxy
Colour: red or gray
Marking: OEM or M-Tub or at customers’ requirements
Place of origin: China
Application: Water drainage
Tensile strength min.150Mpa
Maximum brinell hardness HB260
Internal coating resistance to salt spray: at least 350h, common 700 hours. resistance to waster water: at least 30 days at 23℃.
chemical resistance from PH2 to PH12 at least 30 days at 23 ℃.
resistance to temperature cycling: 1500 cycles between to 15-93℃.
-
EN877 Pipe Fitting P Trap /Siphonic Trap
SML EN877 CAST IRON PIPE FITTINGS for building drainage
P Trap & Siphonic Trap
Standard: BS EN877/DIN 19522/ISO6594
Material: gray cast iron ISO185
Coating: Epoxy Resin Paint&Powder epoxy
Colour: red or gray
Marking: OEM or M-Tub or at customers’ requirements
Place of origin: China
Application: Water drainage
Tensile strength min.150Mpa
Maximum brinell hardness HB260
Internal coating resistance to salt spray: at least 350h, common 700 hours. resistance to waster water: at least 30 days at 23℃.
chemical resistance from PH2 to PH12 at least 30 days at 23 ℃.
resistance to temperature cycling: 1500 cycles between to 15-93℃.
-
EN877 Cast Iron Pipe Fitting Expansion Plug
SML EN877 CAST IRON PIPE FITTINGS for building drainage
Gap Plug Expansion Plug
Standard: BS EN877/DIN 19522/ISO6594
Material: gray cast iron ISO185
Coating: Epoxy Resin Paint&Powder epoxy
Colour: red or gray
Marking: OEM or M-Tub or at customers’ requirements
Place of origin: China
Application: Water drainage
Tensile strength min.150Mpa
Maximum brinell hardness HB260
Internal coating resistance to salt spray: at least 350h, common 700 hours. resistance to waster water: at least 30 days at 23℃.
chemical resistance from PH2 to PH12 at least 30 days at 23 ℃.
resistance to temperature cycling: 1500 cycles between to 15-93℃.
-
Short Pipe with Oval/Rectangular Door
SML EN877 CAST IRON PIPE FITTINGS for building drainage
Short Pipe with Oval Rectangular Door
Standard: BS EN877/DIN 19522/ISO6594
Material: gray cast iron ISO185
Coating: Epoxy Resin Paint&Powder epoxy
Colour: red or gray
Marking: OEM or M-Tub or at customers’ requirements
Place of origin: China
Application: Water drainage
Tensile strength min.150Mpa
Maximum brinell hardness HB260
Internal coating resistance to salt spray: at least 350h, common 700 hours. resistance to waster water: at least 30 days at 23℃.
chemical resistance from PH2 to PH12 at least 30 days at 23 ℃.
resistance to temperature cycling: 1500 cycles between to 15-93℃.
-
Short Bend with Vent/Short Bend with Heel Opening
SML EN877 CAST IRON PIPE FITTINGS for building drainage
88°Short Bend with Vent 88°Short Bend with Heel Opening
Standard: BS EN877/DIN 19522/ISO6594
Material: gray cast iron ISO185
Coating: Epoxy Resin Paint&Powder epoxy
Colour: red or gray
Marking: OEM or M-Tub or at customers’ requirements
Place of origin: China
Application: Water drainage
Tensile strength min.150Mpa
Maximum brinell hardness HB260
Internal coating resistance to salt spray: at least 350h, common 700 hours. resistance to waster water: at least 30 days at 23℃.
chemical resistance from PH2 to PH12 at least 30 days at 23 ℃.
resistance to temperature cycling: 1500 cycles between to 15-93℃.
- Email Support plumbingsales01@sjzmetal-electric.com
- Call Support
0086-13833199589
0086-311-86031515