-
Cast Iron Soil Pipe Fittings Reducer
SML EN877 CAST IRON PIPE FITTINGS for building drainage
Reducer/Flange Adaptor/Down Pipe Support/Bearing Ring
Standard: BS EN877/DIN 19522/ISO6594
Material: gray cast iron ISO185
Coating: Epoxy Resin Paint&Powder epoxy
Colour: red or gray
Marking: OEM or M-Tub or at customers’ requirements
Place of origin: China
Application: Water drainage
Tensile strength min.150Mpa
Maximum brinell hardness HB260
Internal coating resistance to salt spray: at least 350h, common 700 hours. resistance to waster water: at least 30 days at 23℃.
chemical resistance from PH2 to PH12 at least 30 days at 23 ℃.
resistance to temperature cycling: 1500 cycles between to 15-93℃.
-
88 Degree Double Bend
SML EN877 CAST IRON PIPE FITTINGS for building drainage
15° short bend DN50-DN200 30° short bend DN50-DN200
45°short bend DN40-DN300 68°short bend DN40-DN300
88°short bend DN40-DN300 88°double bend DN50-DN150
Standard: BS EN877/DIN 19522/ISO6594
Material: gray cast iron ISO185
Coating: Epoxy Resin Paint&Powder epoxy
Colour: red or gray
Marking: OEM or M-Tub or at customers’ requirements
Place of origin: China
Application: Water drainage
Tensile strength min.150Mpa
Maximum brinell hardness HB260
Internal coating resistance to salt spray: at least 350h, common 700 hours. resistance to waster water: at least 30 days at 23℃.
chemical resistance from PH2 to PH12 at least 30 days at 23 ℃.
resistance to temperature cycling: 1500 cycles between to 15-93℃
-
88 Degree Short Bend
SML EN877 CAST IRON PIPE FITTINGS for building drainage
15° short bend DN50-DN200 30° short bend DN50-DN200
45°short bend DN40-DN300 68°short bend DN40-DN300
88°short bend DN40-DN300 88°double bend DN50-DN150
Standard: BS EN877/DIN 19522/ISO6594
Material: gray cast iron ISO185
Coating: Epoxy Resin Paint&Powder epoxy
Colour: red or gray
Marking: OEM or M-Tub or at customers’ requirements
Place of origin: China
Application: Water drainage
Tensile strength min.150Mpa
Maximum brinell hardness HB260
Internal coating resistance to salt spray: at least 350h, common 700 hours. resistance to waster water: at least 30 days at 23℃.
chemical resistance from PH2 to PH12 at least 30 days at 23 ℃.
resistance to temperature cycling: 1500 cycles between to 15-93℃.
-
68 Degree Short Bend
SML EN877 CAST IRON PIPE FITTINGS for building drainage
15° short bend DN50-DN200 30° short bend DN50-DN200
45°short bend DN40-DN300 68°short bend DN40-DN300
88°short bend DN40-DN300 88°double bend DN50-DN150
Standard: BS EN877/DIN 19522/ISO6594
Material: gray cast iron ISO185
Coating: Epoxy Resin Paint&Powder epoxy
Colour: red or gray
Marking: OEM or M-Tub or at customers’ requirements
Place of origin: China
Application: Water drainage
Tensile strength min.150Mpa
Maximum brinell hardness HB260
Internal coating resistance to salt spray: at least 350h, common 700 hours. resistance to waster water: at least 30 days at 23℃.
chemical resistance from PH2 to PH12 at least 30 days at 23 ℃.
resistance to temperature cycling: 1500 cycles between to 15-93℃.
-
45 Degree Short Bend
SML EN877 CAST IRON PIPE FITTINGS for building drainage
15° short bend DN50-DN200 30° short bend DN50-DN200
45°short bend DN40-DN300 68°short bend DN40-DN300
88°short bend DN40-DN300 88°double bend DN50-DN150
Standard: BS EN877/DIN 19522/ISO6594
Material: gray cast iron ISO185
Coating: Epoxy Resin Paint&Powder epoxy
Colour: red or gray
Marking: OEM or M-Tub or at customers’ requirements
Place of origin: China
Application: Water drainage
Tensile strength min.150Mpa
Maximum brinell hardness HB260
Internal coating resistance to salt spray: at least 350h, common 700 hours. resistance to waster water: at least 30 days at 23℃.
chemical resistance from PH2 to PH12 at least 30 days at 23 ℃.
resistance to temperature cycling: 1500 cycles between to 15-93℃.
-
30 Degree Short Bend
SML EN877 CAST IRON PIPE FITTINGS for building drainage
15° short bend DN50-DN200 30° short bend DN50-DN200
45°short bend DN40-DN300 68°short bend DN40-DN300
88°short bend DN40-DN300 88°double bend DN50-DN150
Standard: BS EN877/DIN 19522/ISO6594
Material: gray cast iron ISO185
Coating: Epoxy Resin Paint&Powder epoxy
Colour: red or gray
Marking: OEM or M-Tub or at customers’ requirements
Place of origin: China
Application: Water drainage
Tensile strength min.150Mpa
Maximum brinell hardness HB260
Internal coating resistance to salt spray: at least 350h, common 700 hours. resistance to waster water: at least 30 days at 23℃.
chemical resistance from PH2 to PH12 at least 30 days at 23 ℃.
resistance to temperature cycling: 1500 cycles between to 15-93℃.
-
15 Degree Short Bend
SML EN877 CAST IRON PIPE FITTINGS for building drainage
15° short bend DN50-DN200 30° short bend DN50-DN200
45°short bend DN40-DN300 68°short bend DN40-DN300
88°short bend DN40-DN300 88°double bend DN50-DN150
Standard: BS EN877/DIN 19522/ISO6594
Material: gray cast iron ISO185
Coating: Epoxy Resin Paint&Powder epoxy
Colour: red or gray
Marking: OEM or M-Tub or at customers’ requirements
Place of origin: China
Application: Water drainage
Tensile strength min.150Mpa
Maximum brinell hardness HB260
Internal coating resistance to salt spray: at least 350h, common 700 hours. resistance to waster water: at least 30 days at 23℃.
chemical resistance from PH2 to PH12 at least 30 days at 23 ℃.
resistance to temperature cycling: 1500 cycles between to 15-93℃.
-
EN877 SML Hubless Cast Iron Pipe
The SML no-hub cast iron drainage pipes and fittings meet the standard of BSEN877, DIN19522, ISO6594. The materials are 100% reusable and recyclable, with low sound transmission, fire proof, leak proof and anti-corrosive. They are widely used for evacuation of water from buildings, drainage, waste and vent. Also rainwater systerm installed outside buildings and buried system underground can be supplied.
The EN877pipes outside coating is red, epoxy with a thickness of not less than 70um. Inside coating is yellow epoxy resin with a thickness of 120um. Or inside and outside are more than 120μm powder epoxy coating with red colour.
The fittings are also red inside and outside, liquid epoxy resin is over 70um, and powder epoxy is over 120um thick.
-
EN877 KML Hubless Cast Iron Pipe
KML drainage pipe and fittings are used for grease-containing waste water of professional kitchens and similar facilities.
Outside coating: Bear a spray zinc coating with an areal density of min 130g/㎡, and above that an epoxy cover of a minimum of 70um.
Inside coating is orche-coloured epoxy.A double layer of resin epoxy with a total layer thickness 240um.
KML fittings are coated inside and outside with a high quality powder epoxy of least 120um.
-
EN877 SML Hubless Cast Iron Pipe
The SML no-hub cast iron drainage pipes and fittings meet the standard of BSEN877, DIN19522, ISO6594. The materials are 100% reusable and recyclable, with low sound transmission, fire proof, leak proof and anti-corrosive. They are widely used for evacuation of water from buildings, drainage, waste and vent. Also rainwater systerm installed outside buildings and buried system underground can be supplied.
The EN877pipes outside coating is red, epoxy with a thickness of not less than 70um. Inside coating is yellow epoxy resin with a thickness of 120um. Or inside and outside are more than 120μm powder epoxy coating with red colour.
The fittings are also red inside and outside, liquid epoxy resin is over 70um, and powder epoxy is over 120um thick.
-
EN877 SML Hubless Cast Iron Pipe
The SML no-hub cast iron drainage pipes and fittings meet the standard of BSEN877, DIN19522, ISO6594. The materials are 100% reusable and recyclable, with low sound transmission, fire proof, leak proof and anti-corrosive. They are widely used for evacuation of water from buildings, drainage, waste and vent. Also rainwater systerm installed outside buildings and buried system underground can be supplied.
The EN877pipes outside coating is red, epoxy with a thickness of not less than 70um. Inside coating is yellow epoxy resin with a thickness of 120um. Or inside and outside are more than 120μm powder epoxy coating with red colour.
The fittings are also red inside and outside, liquid epoxy resin is over 70um, and powder epoxy is over 120um thick.
-
88° Short Bend with Access Door
SML EN877 CAST IRON PIPE FITTINGS for building drainage
45° Short Bend with Access Door 88° Short Bend with Access Door
45° Single Branch with Access Door 88° Single Branch with Access Door
88° Long Radius Bend with Access Door
Standard: BS EN877/DIN 19522/ISO6594
Material: gray cast iron ISO185
Coating: Epoxy Resin Paint&Powder epoxy
Colour: red or gray
Marking: OEM or M-Tub or at customers’ requirements
Place of origin: China
Application: Water drainage
Tensile strength min.150Mpa
Maximum brinell hardness HB260
Internal coating resistance to salt spray: at least 350h, common 700 hours. resistance to waster water: at least 30 days at 23℃.
chemical resistance from PH2 to PH12 at least 30 days at 23 ℃.
resistance to temperature cycling: 1500 cycles between to 15-93℃.
- Email Support plumbingsales01@sjzmetal-electric.com
- Call Support
0086-13833199589
0086-311-86031515