-
Rubber Reducer
Rubber Reducer
Strip Material and Fixed parts: S.S 1.4016 as per EN10088
Sealing rubber/Gasket:EPDM -
Stand Pipe Slide Bracket
Stand Pipe Slide Bracket
Materail : Carbon Steel wtih zinc plated
Sealing rubber/Gasket:EPDM/NBR/SBR
-
Konfix Multi Coupling
Konfix Multi Couplings are designed to transition SML sewerage to pipes made of other materials.
-
Fix Coupling
EK-Fix Rubber Coupling. When arranging an SML sewer system made of cast iron, a transition to plastic may be required. To ensure a reliable connection of these materials allows the transitional connecting part – the cuff.
Strip Material and Fixed parts: S.S 1.4016 as per EN10088
Sealing rubber/Gasket:EPDM
-
Pipe Coupling Strub Grip
Connector for metal and cast iron pipes with high internal pressure and axial load. The grip collars are fixed outside of the shielded couplings. They can strengthen the pressure which pipes bear.
-
EN877 SML Hubless Cast Iron Pipe
The SML no-hub cast iron drainage pipes and fittings meet the standard of BSEN877, DIN19522, ISO6594. The materials are 100% reusable and recyclable, with low sound transmission, fire proof, leak proof and anti-corrosive. They are widely used for evacuation of water from buildings, drainage, waste and vent. Also rainwater systerm installed outside buildings and buried system underground can be supplied.
The EN877pipes outside coating is red, epoxy with a thickness of not less than 70um. Inside coating is yellow epoxy resin with a thickness of 120um. Or inside and outside are more than 120μm powder epoxy coating with red colour.
The fittings are also red inside and outside, liquid epoxy resin is over 70um, and powder epoxy is over 120um thick.
-
EN877 SML Hubless Cast Iron Pipe
The SML no-hub cast iron drainage pipes and fittings meet the standard of BSEN877, DIN19522, ISO6594. The materials are 100% reusable and recyclable, with low sound transmission, fire proof, leak proof and anti-corrosive. They are widely used for evacuation of water from buildings, drainage, waste and vent. Also rainwater systerm installed outside buildings and buried system underground can be supplied.
The EN877pipes outside coating is red, epoxy with a thickness of not less than 70um. Inside coating is yellow epoxy resin with a thickness of 120um. Or inside and outside are more than 120μm powder epoxy coating with red colour.
The fittings are also red inside and outside, liquid epoxy resin is over 70um, and powder epoxy is over 120um thick.
-
EN877 Pipe Fitting P Trap
SML EN877 CAST IRON PIPE FITTINGS for building drainage
P Trap & Siphonic Trap
Standard: BS EN877/DIN 19522/ISO6594
Material: gray cast iron ISO185
Coating: Epoxy Resin Paint&Powder epoxy
Colour: red or gray
Marking: OEM or M-Tub or at customers’ requirements
Place of origin: China
Application: Water drainage
Tensile strength min.150Mpa
Maximum brinell hardness HB260
Internal coating resistance to salt spray: at least 350h, common 700 hours. resistance to waster water: at least 30 days at 23℃.
chemical resistance from PH2 to PH12 at least 30 days at 23 ℃.
resistance to temperature cycling: 1500 cycles between to 15-93℃
-
EN877 Cast Iron Pipe Fitting Siphonic Trap
SML EN877 CAST IRON PIPE FITTINGS for building drainage
P Trap & Siphonic Trap
Standard: BS EN877/DIN 19522/ISO6594
Material: gray cast iron ISO185
Coating: Epoxy Resin Paint&Powder epoxy
Colour: red or gray
Marking: OEM or M-Tub or at customers’ requirements
Place of origin: China
Application: Water drainage
Tensile strength min.150Mpa
Maximum brinell hardness HB260
Internal coating resistance to salt spray: at least 350h, common 700 hours. resistance to waster water: at least 30 days at 23℃.
chemical resistance from PH2 to PH12 at least 30 days at 23 ℃.
resistance to temperature cycling: 1500 cycles between to 15-93℃.
-
Cast Iron Sewer Pipe Fittings Corner Branch
SML EN877 CAST IRON PIPE FITTINGS for building drainage
88° Double Branch 45° Corner Branch 88° Corner Branch
Standard: BS EN877/DIN 19522/ISO6594
Material: gray cast iron ISO185
Coating: Epoxy Resin Paint&Powder epoxy
Colour: red or gray
Marking: OEM or M-Tub or at customers’ requirements
Place of origin: China
Application: Water drainage
Tensile strength min.150Mpa
Maximum brinell hardness HB260
Internal coating resistance to salt spray: at least 350h, common 700 hours. resistance to waster water: at least 30 days at 23℃.
chemical resistance from PH2 to PH12 at least 30 days at 23 ℃.
resistance to temperature cycling: 1500 cycles between to 15-93℃.
-
Cast Iron Sewer Pipe Fittings Double branch
SML EN877 CAST IRON PIPE FITTINGS for building drainage
88° Double Branch 45° Corner Branch 88° Corner Branch
Standard: BS EN877/DIN 19522/ISO6594
Material: gray cast iron ISO185
Coating: Epoxy Resin Paint&Powder epoxy
Colour: red or gray
Marking: OEM or M-Tub or at customers’ requirements
Place of origin: China
Application: Water drainage
Tensile strength min.150Mpa
Maximum brinell hardness HB260
Internal coating resistance to salt spray: at least 350h, common 700 hours. resistance to waster water: at least 30 days at 23℃.
chemical resistance from PH2 to PH12 at least 30 days at 23 ℃.
resistance to temperature cycling: 1500 cycles between to 15-93℃.
-
Short Bend with Heel Opening
SML EN877 CAST IRON PIPE FITTINGS for building drainage
88°Short Bend with Vent 88°Short Bend with Heel Opening
Standard: BS EN877/DIN 19522/ISO6594
Material: gray cast iron ISO185
Coating: Epoxy Resin Paint&Powder epoxy
Colour: red or gray
Marking: OEM or M-Tub or at customers’ requirements
Place of origin: China
Application: Water drainage
Tensile strength min.150Mpa
Maximum brinell hardness HB260
Internal coating resistance to salt spray: at least 350h, common 700 hours. resistance to waster water: at least 30 days at 23℃.
chemical resistance from PH2 to PH12 at least 30 days at 23 ℃.
resistance to temperature cycling: 1500 cycles between to 15-93℃.
- Email Support plumbingsales01@sjzmetal-electric.com
- Call Support
0086-13833199589
0086-311-86031515